Em cài Creo 2.0 F000 xong nó bị như thế này lun ????

C
Bình luận: 12Lượt xem: 3,199

caubechip

Tài xế O-H

Bác nào biết nó bị gì chỉ em với nha. em cảm ơn nhiều
 

OS

Đời là bể khổ!
Nhìn vào cái task bar của cụ em nghĩ do nhiều ứng dụng đang chạy quá, phần mềm lại chiếm dụng nhiều ram nữa nên mới bị hiện tượng như vậy.
 

Già Làng O-H

GIÀ LÀNG O-H
thông tin này chính xác không vậy anh? em thấy hơi lạ lạ. hic hic. vậy là k xài dc oy
Graphics Information
For 3D-hardware acceleration, an OpenGL graphics card must be used that has been tested in a PTC-certified configuration. To ensure the compatibility of a graphics driver with Creo 2.0, a PTC certified or supported hardware configuration is recommended. Graphics cards that support at least OpenGL 3.1 are recommended for Creo 2.0.
PTC recognizes that customers can benefit from using latest graphics driver and performance optimizations and improvements made by PTC’s Graphics Hardware Partners. With new workstations being continuously certified by PTC, the most current graphics drivers used in the certification process can now be re-applied to previously certified configurations, as long as the configuration belongs to the same combination of workstation and graphics hardware families.
For users of Direct3D on Windows 7, the March 2009 or later release of the DirectX 10.0 End User Run Time libraries must be installed. Additionally, Medium to High-End graphics cards that fully support Direct3D 10.0 are recommended for adequate performance. Visit the Microsoft website for more information about downloading and installing Direct3D.
 

caubechip

Tài xế O-H
Graphics Information
For 3D-hardware acceleration, an OpenGL graphics card must be used that has been tested in a PTC-certified configuration. To ensure the compatibility of a graphics driver with Creo 2.0, a PTC certified or supported hardware configuration is recommended. Graphics cards that support at least OpenGL 3.1 are recommended for Creo 2.0.
PTC recognizes that customers can benefit from using latest graphics driver and performance optimizations and improvements made by PTC’s Graphics Hardware Partners. With new workstations being continuously certified by PTC, the most current graphics drivers used in the certification process can now be re-applied to previously certified configurations, as long as the configuration belongs to the same combination of workstation and graphics hardware families.
For users of Direct3D on Windows 7, the March 2009 or later release of the DirectX 10.0 End User Run Time libraries must be installed. Additionally, Medium to High-End graphics cards that fully support Direct3D 10.0 are recommended for adequate performance. Visit the Microsoft website for more information about downloading and installing Direct3D.

anh xem dùm em con card ADM redeon 7650M (2G) có xài dc không với. Em thấy em xài ProE 5.0 nó vẫn bình thường mà nhưng với bản Creo 2.0 lại bị lỗi vậy? Có phải do việc em cùng cài đặt cả 2 bản nên nó vậy không anh?
 

Bạn hãy đăng nhập hoặc đăng ký để phản hồi tại đây nhé.

Bên trên