Hướng dẫn học inventor 2010 từ căn bản bằng video

[vinamech]

Giới thiệu Inventor 2010
[video=youtube;5hTL4ljTUS0]http://www.youtube.com/watch?v=5hTL4ljTUS0&feature=player_embedded[/video]
Giới thiệu giao diện
[video=youtube;DBDikFxOr8c]http://www.youtube.com/watch?v=DBDikFxOr8c&feature=player_embedded[/video]
Tạo một file mới
[video=youtube;kwqIU9wepB4]http://www.youtube.com/watch?v=kwqIU9wepB4&feature=player_embedded[/video]
Tạo ràng buộc Contraints
[video=youtube;Yb6xqiwTzmc]http://www.youtube.com/watch?v=Yb6xqiwTzmc&feature=player_embedded[/video]
Hiệu chỉnh lưới
[video=youtube;dPtSH9TgUQk]http://www.youtube.com/watch?v=dPtSH9TgUQk&feature=player_embedded[/video]
Cách chọn đối tượng
[video=youtube;eDH6GRLAGhU]http://www.youtube.com/watch?v=eDH6GRLAGhU&feature=player_embedded[/video]
Tạo biên dạng profile
[video=youtube;OMyBWoc2qTc]http://www.youtube.com/watch?v=OMyBWoc2qTc&feature=player_embedded[/video]
Chia sẻ sketch
[video=youtube;kKmhXxTH9Bw]http://www.youtube.com/watch?v=kKmhXxTH9Bw&feature=player_embedded[/video]
Lệnh Centerline
[video=youtube;SWQ0nOT0Wnc]http://www.youtube.com/watch?v=SWQ0nOT0Wnc&feature=player_embedded[/video]
Regtaagular Parrten
[video=youtube;GojrzEyXrNY]http://www.youtube.com/watch?v=GojrzEyXrNY&feature=player_embedded[/video]
[video=youtube;Dx8nk3m3ogo]http://www.youtube.com/watch?v=Dx8nk3m3ogo&feature=player_embedded[/video]
Circle Parrten
[video=youtube;5lv7CVRCHFo]http://www.youtube.com/watch?v=5lv7CVRCHFo&feature=player_embedded[/video]
Lệnh tạo lỗ
[video=youtube;3CqEtgCQHaU]http://www.youtube.com/watch?v=3CqEtgCQHaU&feature=player_embedded[/video]