Đang tải...

Chúc các cụ lái xe vui vẻ và an toàn trên xa lộ O-H!

"Không làm nhanh, không ham lợi nhỏ. Làm nhanh dễ hư chuyện; thấy lợi nhỏ mà ham thì không thể làm nên chuyện lớn"

SolidWorks & SolidCAM SolidWorks 2004/2005 Tutorial Assembly Modeling

Thảo luận trong 'Phần mềm kỹ thuật' bắt đầu bởi javaro_2405, 23/7/10.

Thành viên đang xem bài viết (Users: 0, Guests: 0)

  1. javaro_2405
    Offline

    javaro_2405 Tài xế O-H

    Tham gia ngày:
    24/3/09
    Số km:
    2,143
    Được đổ xăng:
    67
    Xăng:
    1,297 lít xăng
    [​IMG]
    Content Inside :
    For the Intermediate SolidWorks User, Ability to create assemblies with multiple configurations. • An understanding of In-context methods as a Top Down assembly modeling approach. • PLATE-B part. • Ability to create, Lock and Redefine External references. • Knowledge to develop and incorporate assembly configurations at various levels
    with the ConfigurationManager and Design Table. Build modeling skill and speed. Project 3 primarily utilizes Pop-up menus and Shortcut keys to execute the tools in the Assembly toolbar. In the Top Down design assembly modeling approach, the major design requirements are translated into assemblies, sub-assemblies and components. You do not need all of the required component design details. The model requires individual relationships between components. There are two methods to begin a Top Down design assembly approach: • Method 1: Start with a Layout Sketch in the assembly. • Method 2: Start with a component in the assembly. In Method 1, all major components are positioned based on a 2D sketch. Relationships between sub-assemblies must be maintained for proper fit. Utilize Method 1 in Project 6.

    Download: Clickhere!
     

Chia sẻ trang này