Đang tải...

CHÀO MỪNG NGÀY 20-11

"Thưa các Thầy Cô, hôm nay hôm nay ngày 20.11 kỷ niệm 35 năm ngày hiến chương nhà giáo Việt Nam. OTO-HUI xin chúc Các Thầy Cô sức khoẻ dồi dào, giữ mãi ngọn lửa nhiệt huyết tiếp tục chèo lái những chuyến đó tri thức đến bến bờ của nền văn minh nhân loại. Xin chân thành cảm ơn các Thầy Cô đã tham gia và tạo giá trị cho các thế hệ trên OTO HUI."

The Art of Gear Fabrication

Thảo luận trong 'Thùng rác diễn đàn' bắt đầu bởi khoadongluc, 11/12/09.

Thành viên đang xem bài viết (Users: 0, Guests: 0)

  1. khoadongluc
    Offline

    khoadongluc Nothing Is Impossible
    Thành viên BQT

    Tham gia ngày:
    17/3/09
    Số km:
    22,247
    Được đổ xăng:
    8,773
    Xăng:
    133,052 lít xăng
    [​IMG]

    Prem H Daryani, "The Art of Gear Fabrication"
    Industrial Press, Inc. | 2002 | ISBN: 083113142X | 208 pages | PDF | 30,3 MB
    This in-depth guidebook places emphasis on teaching beginners and advanced planners how to process gears, and will enable manufacturing engineers familiar with machine shop practice to be specialists in the gear manufacturing field. The first few chapters are devoted to common gear nomenclature and analysis of processing of six typical gears, including explanations of the logic and reasoning for every sequence of operation. Subsequent chapters thoroughly describe production, selection of materials, heat treatment, plating, methods of cutting, hobbing, shaping, and grinding.

    Unique in content and broad in scope, The Art of Gear Fabrication provides beginners with sufficient information to independently process six typical gears step by step and presents model numbers, capacity and addresses of gear machinery manufacturers and suppliers at the end of each process description. It also offers gear designers practical and useful hints on reducing fabricating costs. And it contains useful tables from commercial catalogs, including cross-references of different U.S. standards and American stainless steel materials with equivalent German, British, French and Italian materials.

    Additionally, it is essential for manufacturing and design engineers to have sufficient knowledge of various heat treatments and their related cost. Though it is a specialty, the author describes this subject in as easy-to-understand manner as possible. Gear designers and entry-level manufacturing and processing engineers in the machine shop field will find this reference extremely helpful and valuable.


    use Foxit Reader to open

    depositfiles.com


    uploading.com


    mirror
     

Chia sẻ trang này