Đang tải...

Tài liệu cơ khí Giới Thiệu Một Số Bộ Khuôn Đúc

Thảo luận trong 'Cơ khí chế tạo' bắt đầu bởi bkhn, 28/3/10.

Thành viên đang xem bài viết (Users: 0, Guests: 0)

  1. bkhn
    Offline

    Tài xế O-H
    Expand Collapse

    Tham gia ngày:
    9/7/09
    Số km:
    582
    Được đổ xăng:
    26
    Mã lực:
    36
    Xăng:
    -18 lít xăng
    • [​IMG] Motorcycle part Mold We are specialized in producing Motorcycle Body Mold,This is one of our products for Honda series.
    • [​IMG] Motorcycle mold We are specialized in producing Motorcycle Body Mold,This is one of our products for Zhenshen 2,Yamaha series.
    • [​IMG] Motorcycle Body Mold We are specialized in producing Motorcycle Body Mold,This is one of our products for Honda series.
    • [​IMG] Motorcycle Body Mold We are specialized in producing Motorcycle Body Mold,This is one of our products for Tian lang xing motorcycle - Yamaha series.


    • [​IMG] Motorcycle Body Mold movable mould cavity and stationary mould cavity use steel 718,from Germany,this material can full strength to HRC28-52,slider and guide rod use standard parts from China.
    • [​IMG] Motorcycle Body Mold movable mould cavity and stationary mould cavity use steel 718,from Germany,this material can full strength to HRC28-52,slider and guide rod use standard parts from China.
    • [​IMG] Motorcycle Body Mold movable mould cavity and stationary mould cavity use steel 718,from Germany,this material can full strength to HRC28-52,slider and guide rod use standard parts from China.
    • [​IMG] Motorcycle Body Mold movable mould cavity and stationary mould cavity use steel 718,from Germany,this material can full strength to HRC28-52,slider and guide rod use standard parts from China.
     
  2. thuan95
    Offline

    Tài xế O-H
    Expand Collapse

    Tham gia ngày:
    16/10/09
    Số km:
    23
    Được đổ xăng:
    2
    Mã lực:
    1
    Giới tính:
    Nam
    Xăng:
    50 lít xăng
    @bkhn: Bác up lại hình được không ạ. Cảm ơn nhiều!
     

Chia sẻ trang này

×