DTC-ACTIVE
Tài xế O-H
-Em xin chia sẻ với các bác ,cái remote MAZDA 2 em mới mua về ,hỏi bên hãng người ta nói phải dùng máy của hãng mới cài được ,em đánh liều tự mò và cài đặt không ngờ công việc rất đơn giản mà không cần máy móc hỗ trợ ,nếu bác nào gặp xin làm theo hướng dẫn nhé !
1. Open the driver side door and sit in the car with the door open.
2. Press the "lock" button on the inside of the door. Press unlock immediately afterward.
3. Insert the key into the ignition. Turn the key to the "On" position, then off again. Repeat the process three times within 10 seconds.
4. Close the car door and open it again. Repeat the process twice more so that you do this a total of three times. On the third time the door should be open. The doors will lock and then unlock automatically.
5. Press the lock button on the remote control key twice very quickly. The doors will lock and unlock as you press the button. Get out of the car and close the door. Test the key by pressing lock and unlock again. You have now programmed the Mazda
1. Open the driver side door and sit in the car with the door open.
2. Press the "lock" button on the inside of the door. Press unlock immediately afterward.
3. Insert the key into the ignition. Turn the key to the "On" position, then off again. Repeat the process three times within 10 seconds.
4. Close the car door and open it again. Repeat the process twice more so that you do this a total of three times. On the third time the door should be open. The doors will lock and then unlock automatically.
5. Press the lock button on the remote control key twice very quickly. The doors will lock and unlock as you press the button. Get out of the car and close the door. Test the key by pressing lock and unlock again. You have now programmed the Mazda